New Optimon now works inside Claude and ChatGPT: ask in your own AI, get Optimon's analysis.See how to connect →

Direct Pay bids compete net now. Your reports show gross

Since 10 November 2026 Open Bidding Direct Pay bids enter the Ad Manager auction net of Google's fee, while reports stay gross until 2027. How to compare.

A brass two-pan balance on a walnut jeweller's bench, one pan holding one coin fewer than the other, and the missing coin, enamelled violet, lying apart on the bench.

Since 10 November 2026, Open Bidding Direct Pay bids enter the Ad Manager auction at their net value, after Google's media fee, so the winning bid pays you the most. Reporting has not caught up. Until an update Google plans for early 2027, Ad Manager shows Direct Pay at the gross bid price, with the fee listed apart.

That gap matters the moment you put a Direct Pay partner next to a standard Open Bidding partner or a Prebid bidder and sort by eCPM. The auction is already comparing net numbers. Your report is not, so Direct Pay looks better on screen than it pays. Below is what changed, how the money moves, and the report that puts all three demand paths on the same footing.

What Google changed on 10 November

Google moved the date once. The help page and the release notes still carry both dates, so it helps to have them in one place.

Date What happened
1 November 2026 The date first given for net bidding on Direct Pay. The help page still mentions it in one section.
10 November 2026 Direct Pay bids start entering the auction at net value.
16 November 2026 The Ad Manager release notes confirm the move from 1 to 10 November.
Early 2027 Planned reporting update. Until then, reports show the gross bid price and the media fee separately.

Google says the change brings Direct Pay in line with standard Open Bidding, where, in its own words, "the highest net bid (which takes into account Ad Manager's revenue share) wins." It does not describe how Direct Pay bids were ranked before 10 November. Direct Pay itself is still marked Beta and is limited to Ad Manager 360.

How the money moves on Direct Pay

Standard Open Bidding runs through Google. Buyers pay the price they win at, Google collects it, and you are paid under your Ad Exchange agreement, net of Google's share.

Direct Pay splits that in two. The SSP pays you directly, on the terms of a contract between you and the SSP. Google does not collect or pass on the bid amount. It bills you a percentage media fee on every Direct Pay impression, once a month, with your ad serving invoice. Collecting the gross amount from the SSP is your job.

The switch also changes how you appear to buyers. In the SSP's sellers.json file your inventory is listed as PUBLISHER instead of INTERMEDIARY, and Google flags the relationship to the SSP in the OpenRTB request and the SupplyChain object. One SSP gets one payment structure: you cannot keep part of its traffic on revenue share and move the rest to Direct Pay.

Google's help page does not print the fee rate. You will find it in your own network under Admin, Advanced features, in the Costs column of the "Open Bidding direct pay" row. Write it down, because every comparison below needs it.

Why the revenue column no longer compares like with like

Most yield desks see three paths for the same impression: standard Open Bidding, Direct Pay, and Prebid line items. Each one turns a bid into a revenue number differently.

Demand path What competes in the auction Who pays you, and what
Standard Open Bidding The bid net of Ad Manager's revenue share Google, net of its share
Direct Pay, since 10 November The bid net of the Direct Pay media fee The SSP pays the gross; Google invoices the fee monthly. Reports show gross until early 2027
Prebid line items The hb_pb price bucket, rounded down from the bid The SSP, at the actual bid, not the bucket

The Direct Pay row is the one that changed. The auction now uses the net figure and the report still uses the gross one. A Direct Pay partner whose eCPM sits a little above its standard Open Bidding sibling may be ahead by nothing more than the fee you have not taken off yet.

Prebid has its own version of the same problem. Every bid response carries a netRevenue flag, and Prebid.org's definition is short: "The value true is Net." A bidder that returns gross prices should set it to false. If one of your adapters bids gross, Prebid lets you scale its bids down with a bidCpmAdjustment function in pbjs.bidderSettings. Prebid's example takes 15% off. That adjustment changes the price bucket sent to Ad Manager. Prebid line items also report at the bucket price, and Prebid.org notes that rounding "does not impact the price paid, only the auction on the ad server." So a Prebid line item tends to read slightly low against what the SSP pays, while Direct Pay reads high.

Google does not say whether Direct Pay bids entered at gross before 10 November. If they did, they would have won some impressions where another bid paid you more after the fee, and you would expect Direct Pay's share of Open Bidding impressions to slip a little from 10 November at the same bid levels. That is an inference to check against your own data. A flat line means the change made little difference in your network.

The report to pull this week

This takes about twenty minutes and gives you a net view of every Open Bidding partner, before and after the change.

  1. In Ad Manager reporting, create a report with Date and Demand channel as dimensions, and add the yield group dimensions so each Open Bidding partner gets its own row.
  2. Filter Demand channel to Open Bidding and Open Bidding Direct. Google's help page names "Open Bidding Direct" as the Demand channel value for Direct Pay traffic.
  3. Add impressions, revenue and eCPM. Set the date range from 27 October to yesterday, then read it as two blocks: 27 October to 9 November, and 11 November onward. Leave out 10 November itself, and look at 1 to 9 November on their own too, since the help page still mentions 1 November.
  4. Export to a sheet. For every Open Bidding Direct row, multiply revenue and eCPM by one minus your media fee rate. Those are your net figures.
  5. Compare net eCPM per partner across the two blocks, and against your standard Open Bidding partners, which are already paid net of Google's share.
  6. For the same days, open each Direct Pay SSP's own statement. That is the amount you will invoice. If it disagrees with Ad Manager's gross figure by more than currency and rounding, raise it with the SSP before month end.
  7. On the Prebid side, run pbjs.getBidResponses() in the console on a live page and check netRevenue for every bidder. Any bidder returning false needs a bidCpmAdjustment, or its line items will look better than they pay.

When the same SSP bids through two paths

Several SSPs on Google's Direct Pay list also run Prebid adapters, so one company can reach the same impression twice: once through your wrapper and once through Open Bidding. When you decide which path a partner keeps, compare net to net. The Prebid side is the bid, if netRevenue is true. The Direct Pay side is the bid minus the media fee. The SSP's statement settles any argument between the two.

Whether a partner belongs client side, server side or both is a separate per-partner call, and the trade-offs are in our header bidding guide. The 10 November change only fixes which number you should use when you make that call.

Before you move another partner to Direct Pay

Google's help page and the SSPs listed on it set out what each switch needs:

  • Ad Manager 360, and an existing Open Bidding relationship with that SSP.
  • The Administrator or Legal manager role, or the "Sign and accept contracts" permission, to turn Direct Pay on under Admin, Advanced features.
  • A signed agreement or amendment with the SSP, and in most cases a DIRECT line for it in ads.txt or app-ads.txt.
  • Notice. PubMatic asks for a week and recommends switching on the 1st of the next month. Bidease wants a week and written confirmation from both sides, for enabling and for reverting. Index Exchange and TripleLift say their internal processing can take up to a week, and Yieldmo approves every new connection itself.
  • Then, per partner, Delivery, Bidders, Go to Open Bidding, the bidder's name, Payment options, Enable Direct Pay. The status stays Pending until the SSP accepts or rejects.
  • After the switch, open the SSP's sellers.json and check that your seller ID is listed as PUBLISHER.

Either side can revert to Google payment at any time, and Google applies it at once. Line the date up with the SSP's notice terms so a month does not end with traffic on two payment structures and two invoices to reconcile.

If you would rather not rebuild that sheet every month, Optimon reads your own Ad Manager and Prebid data and explains what moved and why, with the numbers beside it.

FAQ

Do I need to change a setting because of the 10 November change?

No. Google changed the auction on its side, and Direct Pay partners you already enabled keep running. What changes is how you read the numbers: until the reporting update Google plans for early 2027, Ad Manager shows the gross bid price for Direct Pay with the media fee listed separately. Take the fee off before you compare a Direct Pay partner with anything else.

Can I use Open Bidding Direct Pay on the standard version of Ad Manager?

No. Google's help page says it is available only in Ad Manager 360, it is still labelled Beta, and the SSP must already be one of your Open Bidding partners. Some SSPs on the list describe their side as a testing phase.

Where do I find the Direct Pay media fee rate?

Google's help page calls it a %-media fee but does not print a rate. In your network, open Admin, then Advanced features, find "Open Bidding direct pay" and read the Costs column before you accept the terms. The fee is billed monthly with your ad serving invoice, on top of any rate card ad serving fees.

Sources

Contact

Let's talk yield.

Whether you want a demo, a free audit, or just want to ask us something - we're a real team that reads every email.

Response time

We reply to every message within one business day. Enterprise enquiries typically get a call scheduled same-day.

Direct line

Prefer email? hello@optimon.io

Not sure where to start?

Drop your domain into the homepage scanner. We'll show you what we find before you commit to anything.

Free scan →